Now I have also Z fever
(I got original CD of the game 
) sorry 4 bad englishI play it on my 3.2GHz System with Windows XP and use the DosBox 0.73 --> works with sound and video
I also got a 500MHz P3 with Wondwos 2k, same DosBox Version --> also works fine (without sound, but didnt necessary)
VERY NICE: CD IS NO LONGER NECESSARY WITH THE DOSBOX
dont tell this to others
Now I try to make a Multiplayer Connection...
I dont know why, but with IPX Server over WLan its not possible.
--> So i tried directlink connection, but also not work
Here a printscreen of the DosBox Window:
and here my Configuration File...
(you see i tried a lot different commands and combination of the, but no chace at all
)I dont know what I do wrong...[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
fullscreen=false
autolock=true
sensitivity=100
waitonerror=true
[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
language=deutsch.lng
memsize=128
[render]
# frameskip -- How many frames dosbox skips before drawing one.
# snapdir -- Directory where screenshots get saved.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
# Supported are none,normal2x,advmame2x
frameskip=0
snapdir=snaps
scaler=normal2x
[cpu]
# cycles -- Amount of instructions dosbox tries to emulate each millsecond.
# Setting this higher than your machine can handle is bad!
cycles=11000
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# wavedir -- Directory where saved sound output goes when you use the
# sound record key-combination, check README file.
nosound=false
rate=22050
blocksize=3500
wavedir=waves
[midi]
# mpu401 -- Enable MPU-401 Emulation.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device.
mpu401=intelligent
device=default
config=
[sblaster]
# sblaster -- Enable the soundblaster emulation.
# base,irq,dma -- The IO/IRQ/DMA address of the soundblaster.
# sbrate -- Sample rate of soundblaster emulation.
# adlib -- Enable the adlib emulation.
# adlibrate -- Sample rate of adlib emulation.
# cms -- Enable the Creative Music System/Gameblaster emulation.
# Enabling both the adlib and cms might give conflicts!
# cmsrate -- Sample rate of cms emulation.
sblaster=true
base=220
irq=7
dma=1
sbrate=22050
adlib=true
adlibrate=22050
cms=false
cmsrate=22050
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy 3-Voice emulation.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation.
pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true
[bios]
# Nothing to setup yet!
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# dpmi -- Enable builtin DPMI host support.
# This might help in getting some games to work, but might crash others.
# So be sure to try both settings.
xms=true
ems=true
dpmi=true
[modem]
# modem -- Enable virtual modem emulation.
# comport -- COM Port modem is connected to.
# listenport -- TCP Port the momdem listens on for incoming connections.
modem=false
# comport=2
# listenport=23
#===========================================================================================================
[serial]
# serial1-4 -- set type of device connected to com port.
# Can be disabled, dummy, modem, nullmodem, directserial.
# Additional parameters must be in the same line in the form of
# parameter:value. Parameter for all types is irq.
# for directserial: realport (required), rxdelay (optional).
# for modem: listenport (optional).
# for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
# transparent, port, inhsocket (all optional).
# Example: serial1=modem listenport:5000
#directserial=false
serial1=directserial realport:com1
#serial1=directserial
#realport=com1
#comport=1
#irq=4
#serial2=directserial realport:com2
#serial2=directserial
#realport=com2
#comport=2
#irq=3
serial2=dummy
serial3=disabled
serial4=disabled
#[directserial]
# directserial=false
# Comport=1
# realport=com1
# defaultbps=1200
# parity=N
# bytesize=8
# stopbit=1
# irq=4
#===========================================================================================================
[ipx]
ipx=true
[autoexec]
# Lines in this section will be run at startup.
mount C C:\z
mount F D:\Z -t cdrom
C:
z
Now I hope, that some one is able to help me... please Please PLEASE PLEASE
greatings from switzerland
...and keep Smil(e)ing
